WaterBoss 5100P1 Iron remover and water softener.

WaterBoss 5100P1 is a universal unit that combines a mechanical self-cleaning filter, iron remover and water softener. Thanks to the technological features of the system, WaterBoss is superior to conventional water softeners in all key areas.

Advantages of WaterBoss 5100P1:

Typically, the installation of water treatment equipment requires the reservation of a special location at the design stage of the facility. And if for some reason this does not happen, it can be very problematic to “fit” a water treatment system into the finished project. Unique compactness, modern design and high performance characteristics make it possible to use the WaterBoss 5100P1 even where a special place has not been previously provided.

Another indicator - the extremely small amount of water spent on regeneration - is very important if there is a local sewerage system and a water meter.

The WaterBoss softening and iron removal system is simple and easy to maintain, and outperforms conventional water softeners in all major categories. Once installed, the system only requires periodic filling with salt.

Ion exchange resin



WaterBoss softeners use a monodisperse resin with a granule diameter of about 0.2 mm. Due to the small size of the granules and the absence of differences in their size, the sorption medium has a very low hydrodynamic resistance and a high rate of ion exchange reaction. The use of such an ion exchange resin in conventional bulk columns is impossible due to the design. Effective regeneration with salt.



Using water and salt, WaterBoss automatically cleans itself, washing away accumulated impurities into the drain, after which it is again ready to provide your home with clean and soft water. The WaterBoss system implements countercurrent regeneration “in a pressed layer”, which is impossible in other systems due to the floating of the ion exchange resin. Thanks to this, significant - up to 70% - savings in salt during regeneration are achieved.